Replacing a laptop screen doesn’t have to be a difficult task. With the right tools and a few simple steps, you can replace a laptop screen quickly and easily. Here are the five steps you need to follow to do so.
First, you need to find the right replacement screen for your laptop. Make sure to match the resolution, size, and shape of the original screen as close as possible. You’ll also need to make sure the video connector is compatible with your laptop, as this will vary between models.
Step One: Prepare the Equipment
If you’re looking to replace a laptop screen in five simple steps, the first thing to do is prepare the equipment. This may include tools such as flat-head screwdrivers and a spudger, among others. Additionally, you may need a replacement laptop screen and adhesive. Gather all the necessary supplies before you start the process. That way, you can easily go back to get what you need if something is missing. Additionally, have a small container to hold screws or other small parts. To ensure that all parts are accounted for, write down the type and number of screws on a piece of paper.
Step Two: Disassemble the Laptop
After you have all the necessary tools, accessories, and parts, it is time to start the laptop screen replacement process. The second step is to disassemble the laptop. To do so, you will need to remove the battery first. Turn off the laptop and flip it over to locate the battery latch. Press the latch and pull the battery out.
If the laptop has a memory card slot, remove the memory card. Now you will need to remove the screws. Remove every screw that is visible on the bottom side of the laptop and set them aside. You may find sticking labels or something else over some of the screws, just peel them off. Now you can pull the panel off and access the inside of the laptop.
Sometimes you will need to remove the motherboard to access the laptop screen. To do so, first identify the screws that are holding the motherboard in place. Unscrew those screws and gently lift the motherboard and you may find the laptop screen in there. Disconnect all the wires and connectors that are connected to the laptop’s motherboard and pull the motherboard out of the laptop and set it aside.
Step Three: Remove the Old Screen
The third step to replacing a laptop screen is to remove the old one. This will require you to remove any bezels or trim pieces that may be attached to the screen frame. Using a putty knife or flathead screwdriver, begin to carefully remove the bezels. Be sure to be gentle, as to not damage the laptop frame. Once the bezels are removed, use a Phillips screwdriver to unscrew the screws mounting the old screen to the laptop. Be sure to place the screws somewhere safe so that you can use them when installing the new screen. Once the old screen is removed, use a cloth to carefully wipe the frame before mounting the new screen.
Conclusion
Follow these simple steps, and you should now have a laptop with a brand new screen. Take the time to do the replacement correctly, and you should end up with a much nicer laptop and the satisfaction of a job well done.
