Has your laptop recently developed a cracked or broken screen? If so, you may be feeling hopeless and frustrated. But have no fear, repairing this kind of damage can be simpler than you think! With the right tools and a step-by-step guide, you can repair your laptop’s broken screen in no time. This article walks you through the process of repairing a laptop with a cracked or broken screen– whether it’s caused by an unfortunate drop or otherwise.
Your first step to fixing your broken laptop screen is to locate the replacement parts. After you’ve chosen a replacement screen for your laptop, which you can find online or at a local electronics store, make sure you have enough space and the necessary materials for the repair. Gather a flat-head screwdriver, a Phillips-screwdriver, a heavy-duty suction cup, and a spudger, as these are all essential for completing the repair.
Step 1: what You’ll Need
Fixing your broken laptop screen is not easy, and you’ll need a few items to get it done. Be sure to have these things on hand to get started:
- Replacement laptop screen
- Electromagnetic bit screwdriver
- Flathead screwdriver
- Laptop toolkit
You might also need some additional items, so it’s best to check ahead of time. Before you replace your laptop screen, make sure you follow specific instructions from the manufacturer. They will provide you with the best information on how to operate on your laptop and what extra supplies, if any, you may need.
Step 2: Begin Taking Your Laptop Apart
If your laptop screen is broken beyond repair, don’t despair – it’s surprisingly straightforward to replace it yourself. Here’s how you can get the job done:
Step 2: Begin Taking Your Laptop Apart
The next step is to begin the teardown process. You will likely need the following tools: a screwdriver, a spudger or blunt knife, and a set of tweezers.
First, locate and remove the screws around the edge of your laptop’s bezel – the black plastic frame that surrounds the display. Take pictures or make a note of the position of the screws, as you’ll need to put them back in their correct positions later. Once the screws are removed, you can gently remove the bezel with a spudger.
After the bezel has been removed, you will see the LCD screen. From here, you’ll need to disconnect the two ribbon cables – one connects the screen to the motherboard, and the other to the inverter. Carefully pull up on each ribbon cable to loosen it from its connector, and take a picture of each one to help you remember where they go.
Finally, there will be four more screws holding down the LCD screen – you’ll need to remove those too. Once all the screws have been removed, you can now take out the broken screen and replace it with the new one.
Step 3: Installation and Reassembly of the New Screen
Once you have the new laptop screen, it’s time to install and reassemble it! Here are the steps you have to complete:
- Shut down your laptop and disconnect the power source.
- Unscrew the hinges of your laptop, the cable covers, the screen bezel and any other components that secure the old screen in the laptop.
- Carefully remove the old screen from the laptop body and set it aside.
- Pay special attention to the grounding wire during removal, as it’s very important that you don’t damage any of the components in the laptop.
- Connect the replacement screen to the same spots where the old screen was connected.
- Secure the wires with the new cover and bezel.
- Tighten the hinges and make sure everything is firmly in place.
- Turn on your laptop and test the new screen. If you see any blurry spots or blacked out sections, it’s a sign that the new screen is not properly connected or something is wrong with the installation.
- Reassemble your laptop, making sure everything is secure.
Congratulations, you now have a brand new laptop screen!
In conclusion, fixing your broken laptop screen can be a difficult process, but with the help of this step-by-step guide, anyone can have their device up and running in no time. With patience, time, and the proper supplies, a broken laptop screen can be repaired and potentially even returned to its original condition.