DIY Guideline: How to Fix a Broken Laptop Screen Easily

DIY Guideline: How to Fix a Broken Laptop Screen Easily


Today’s ultra-thin laptops are nothing like the computers of the past, but with their remarkable portability also comes a much higher risk of damage. A broken laptop screen is one of the most common disasters, and the cost of a replacement can be significant. But, before you shell out the extra cash, it’s worth trying some DIY fixes.

This article will provide an easy-to-follow guideline on how to fix a broken laptop screen. First, you will need to purchase the right replacement parts and tools, followed by the actual repair process. Lastly, tips to prevent damage in the future will be provided.

Gather the Necessary Tools

Gather the Necessary Tools

Fixing a broken laptop screen isn’t as difficult as it may seem. All you need is a little bit of technical know-how, some common tools, and just a few minutes of your time. This DIY guideline will show you how to fix a broken laptop screen easily, with all the necessary tools.

First, you’ll need to gather the necessary tools to get the job done safely. The tools you need for this job include a small flathead screwdriver, a Phillips head screwdriver, a set of tweezers, a small brush, and a cloth.

Once you have the tools, it’s time to start the repair. Shut down your laptop and unplug it from the power outlet. Take out the battery, if that’s possible. Using a flathead screwdriver, remove the screws that are securing the back of the laptop lid.

Now you’re ready to start working on the laptop screen itself. Remove the old and broken screen first. To do this, carefully pry up the plastic bezel and separate it from the frame. Next, you’ll need to unscrew the screws that hold the LCD panel in place. Finally, use tweezers to disconnect the cable and remove the entire panel.

Now it’s time to replace the LCD panel. Start by connecting the new panel to the cables that were previously attached to the old panel. Then, use the Phillips head screwdriver to attach the panel back into the frame. Before you close everything up, you’ll need to clean the inside of the screen with a small brush and cloth.

Finally, your laptop screen should be good as new. Put the plastic bezel back into its place, replace the screws, attach the battery, and boot up the laptop. After a few minutes, you should be ready to enjoy a properly functioning laptop with a nice, new screen!

Prepare and Unscrew the Cracked Screen

Having a cracked laptop screen can be a huge inconvenience, especially when you’re working or studying and need your laptop right away. However, you don’t have to take your laptop to a repair shop just yet. You can easily fix and unscrew the cracked laptop screen on your own by following this DIY guideline! Just make sure that all materials and tools are available.

Steps to Prepare and Unscrew the Cracked Screen

  • Gather Materials. For this project, you will need a few tools and materials such as a screwdriver set with Phillips and flathead, plastic cards, liquid adhesive, tweezers, isopropyl alcohol and a pocket knife.
  • Detach the Bezel. Start by removing the bezel, which is the plastic panel around the laptop screen. You can use credit cards or your pocket knife to pry and remove the bezel.
  • Unscrew the Screen. Carefully, use the screwdriver to unscrew the screws which are holding the screen in place. Make sure that all of the screws are accounted for and not lost.
  • Clean the Panel. Before you apply the adhesive, use isopropyl alcohol to clean off the panel and the frame to ensure a strong hold.
  • Apply Adhesive. Use tweezers to carefully apply the adhesive to the panel. Be sure to apply this in small pieces.
  • Connect the Panel. Finally, connect the panel to the frame and screw it back into place. Let it sit and dry for some time before you attempt to turn on the laptop.

So that’s how you can prepare and unscrew the cracked screen from your laptop in a few simple steps! You may be able to find videos and details online to help you guide your DIY process if you’re unsure about any of the steps.

Install the New Screen

Install the New Screen

DIY Guideline: How to Easily Fix a Broken Laptop Screen

Having an issue with your broken laptop screen can be a challenge, but it doesn’t have to be a huge problem. Instead of opting for a costly repair from a professional, you can tackle this project all by yourself. In this DIY guideline, we’ll take you step by step through the process of how to easily fix a broken laptop screen.

Install the New Screen

In order to install your new laptop screen, you’ll need to carefully remove the old one. Start by disconnecting the connections from the old screen. Then, remove the screws that secure it in place. Be sure to have the new laptop screen handy, as now it’s time to install it.

The first step is to carefully line up and connect the connections. Make sure that all of the cables are properly inserted. Once that’s done, you can start to carefully screw in the new screen. Depending on your model of laptop, you may need to replace more than one screw.

After the new screen is in place, simply reconnect the battery and power cable so that it’s ready to be used. Take the time to go over any extra connections, and make sure everything is properly connected.

That’s it! You’ve successfully installed the new laptop screen yourself. Please enjoy your freshly fixed laptop!


Following this simple DIY Guideline, you should be able to easily fix the broken laptop screen. While it may be tricky or daunting to tackle this kind of problem all by yourself, this step-by-step guide should help make the task simple and straightforward. As long as you follow these instructions carefully, you should be able to successfully fix the broken laptop screen and enjoy your device once again!

Leave a Reply

Your email address will not be published. Required fields are marked *