7 Easy Steps to Take if Water Spills on your Laptop

7 Easy Steps to Take if Water Spills on your Laptop

Total
0
Shares

No matter how careful you are, accidents happen and a glass of water can easily get daubed on your laptop in the blink of an eye. When water spills on your laptop, the first thing to keep in mind is to stay calm and take the proper steps to prevent any permanent damage. If you find yourself in this situation, here is an easy step-by-step guide that will help you minimize the damage.

The first and most important rule to remember when water spills over your laptop is to never attempt to turn it on because this can cause severe damage to your device. Let’s go ahead and learn the correct way to respond when this unfortunate incident occurs.

1. Shut Down and Disconnect

1. Shut Down and Disconnect

When your laptop comes into contact with water, it is an emergency situation. To avoid any damage it is essential to take the right steps quickly. Here are the best 7 things to do if water spills on your laptop:

1. Shut Down and Disconnect: The first step is to shut down your laptop and disconnect it from any power sources or peripherals. Doing so will help to prevent any further damage. Once this has been done, you should wipe away any visible water without moving the laptop and use a vacuum cleaner or a corner of a towel to remove any water and other liquids that have gone into far areas of the laptop.

Removing the battery is also advisable to prevent water from going in any further. If this is not possible, then you should keep it connected to the power source and put some kind of tray or container to block further water entry. You can also put some kind of barrier like a plastic or rubber mat.

It is important to take these steps as soon as possible since water on your laptop can cause a lot of damage. Leaving it unattended for too long can result in permanent damage and make the laptop unusable.

Quickly disconnect your laptop from any power sources, then shut it down.

If water spills on your laptop, you’re facing a possibly costly repair bill or replacement. But don’t panic just yet. Follow this advice and you may be able to save your laptop.

  1. Quickly disconnect your laptop from any power sources, then shut it down.
  2. Turn your laptop upside down or on its side so you can shake out any excess water.
  3. Carefully turn it back over and open the laptop, making sure you keep it upside down so any remaining water doesn’t run toward the motherboard.
  4. Blot out any remaining water using absorbent paper towels.
  5. Unplug any peripherals, to avoid any unnecessary electricity flow.
  6. Air dry your laptop by setting it on its side and keeping it in a well-ventilated room.
  7. Take it to a certified repair center if it still isn’t working correctly after 24-48 hours.

It’s important to remember that water and electronics don’t mix, so be careful around other tech. If you have any concerns about your laptop, seek professional help to avoid further damage and costly repairs.

2. Dry the Exterior

2. Dry the Exterior

It’s a disaster – your laptop took an unexpected bath! Don’t worry, we got your back with these 7 easy steps to take if water spills on your laptop:

2. Dry the Exterior. Unplug your laptop and dry the surface with a soft cloth. Don’t shake the laptop or use any temperature-raising devices to remove the water – it could cause further damage. Try to absorb as much liquid as possible. Make sure you wipe away the excess water from the screen, keyboard, air vents and USB ports.

Afterwards, leave the laptop open, on a flat surface and use a fan to gently blow the remaining moisture away. You can also use a vacuum cleaner’s hose to try and remove any residual water. Be careful to not bump or move the laptop while attempting to dry it.

3. Remove Battery and Storage Devices

If water has spilled on your laptop, it’s important to take the necessary precautions to reduce the potential damage. One of the most important steps is to remove the battery and any storage devices like USB drives, hard drives, and SD cards. This will help to prevent them from becoming damaged and should be done as soon as possible.

To remove the battery and storage devices, turn off the laptop, unplug it from any power source, and then gently remove the battery. You should then remove any storage devices that may have been connected to the laptop. Be sure to store the battery and storage devices in a secure and dry location.

If your laptop has a removable battery and cannot be turned off, you should at least unplug the laptop from any power source to prevent any short circuits. It’s also important to be careful when removing the battery and storage devices to not push too hard or use excessive force.

Once the battery and storage devices have been removed, it’s time to move onto the next step – drying the laptop. This is critical for preventing any potential damage from occurring.

Conclusion

In conclusion, if you ever find yourself dealing with a water spill on your laptop, be sure to take the necessary steps to address the issue. Shut down the laptop, remove the battery, and use an absorbent cloth to carefully remove any liquid. Dry the laptop with a blow dryer if necessary, and use alcohol to clean and disinfect any components. Be sure to avoid powering on the device until it is completely dry. With these easy steps, you can save your laptop from potentially permanent water damage.